top of page
J5 Mk2 - Ultima.
34" scale,  lightly chambered African mahogany body; Maple burl top; ebony board. Three piece maple neck with carbon fibre reinforcement spars; Hand rubbed satin finish; Aguilar J70 p-up in ebony casings, OBP3 a/p, mid freq sw. toggle preamp; Satin Hipshot hardware.
 
Custom fitting:
Matching headstock plates/block inlays; 24 Evo frets; Matching mahogany/ebony knobs; ebony p-up casings.
G5 Balio.
34" scale, 26 frets. Ash body; maple/wenge neck; 5A flamed maple board;  Delano MM p-up; Aguilar OBP3 preamp, Carbon fibre neck reinforcement bars;
 
Custom fitting:
Extra thick neck; Custom Lambroghini Cepheus Blue pearl paint; recessed controls; flush strap locks; side mount jack; padauk inserts. P-up wired for Series/Parallel/Single. Nickel plated ETS/MüB hardware. Resting rubber inserts under bridge.
J5 Mk1 - Alej
32" scale,  lightly chambered walnut body; Walnut top, maple accent line; pau ferro board. Maple neck with carbon fibre reinforcement spars; Hand rubbed satin finish; Bartolini CBJD p-ups; Aguilar OBP3 a/p, mid freq sw. toggle preamp; Satin Hipshot hardware. ETS/MüBHeadless-Hybrid hardware.
 
Custom fitting:
Blackwood ebony headstock plates.
G6 SC Classic, fretless. The III.
34" scale,  Nyatoh body; maple neck; Pau ferro lined fretless board;  Bartolini CBJD p-ups; passive; ETS/MüB headless hardware.
 
Custom fitting:
Carbon fibre neck reinforcement spars; Custom-Fit neck pocket and back contour.
F6 - For Ed.
34" scale, Infinite board; Tiger renghas body,maple/padauck neck, carbon fibre reinforced; balckwood ebony board and top with mayching sapwood; Two Bartolini CBJD p-ups, 3 band preamp (a/p, mid frq sw. toggle).
 
Custom fitting:
Matching knobs, bloodwood fret lines.
J5 Mk1 Elyas
34" scale, 24 frets. Padauk body, Claro Walnut top; Maple accent line; 5A Roasted curly maple;  lined blackwood ebony board. Two Bartolini CBJD p-ups, MüB-T preamp. Hand rubbed satin finish. ETS/MüB hardware.
 
Custom fitting:
Contoured Semi-Hollow construction; Custom Constellation sound holes.
Airborne 5.
30" scale, 24 frets, Nyatoh body, Maple burl top; maple/roasted maple neck, blackwood ebony board. ETS/MüB hardware. Nordstrand Big Split p-up, passive. Hand rubbed satin finish.
 
Custom fitting:
Carbon fibre neck reinforcement bars. Active-Ready.
X3M 5/25.5" The Heart.
25.5" scale length, 24 frets. Padauk body, white ash top and matching headstock plate; padauk neck, blackwood ebony board. ETS/MüB hardware.Bartolini CBJD p-up, passive. a/p Aguilar OBP3 preamp. Hand rubbed satin finish.
 
Custom fitting:
Carbon fibre neck reinforcement bars. MüB-H headphone/aux-in amp; original Heart mother of pearl inlay.
J4 Mk1. For Frank.
33" scale, 22 frets, Raintree body, maple/maple neck, blackwood ebony board. ETS/MüB hardware. Bartolini ssingle coil p-ups, Aguilar OBP2. Black pick guard. High gloss finish.
 
Custom fitting:
Carbon fibre neck reinforcement bars. Master tone. Full Gotoh Cosmo Black hardware.
G5 - The Mahir.
34" scale, 24 frets, 8.5lbs. Buckeye burl top, mahogany core, ash back laminate; Curly maple/wenge neck; Ebony board. Two Aguilar DCB p-ups; OBP3 preamp (a/p, mid frq sw). Mahir is an Arabic word, it means 'skilled' and this bass is just that - versatile, fits comfortably in any genre.
 

Custom fitting:
Carbon fibre neck reinforcement spars; Purpleheart control knob inlays; Marbled black mother of pearl block inlays. Stained ash back laminate; transparent purple finish, high gloss. Satin neck finish.
G5 SC Lia.
34" scale, 24 frets, 9lbs. Maple top. Solid ash body; Maple/ash/zebrawood neck, Blackwood ebony board and headstock plate. Hipshot hardware. Nordstrand Zen Blade pick ups, Bartolini 3 band preamp (a/p, mid freq sw). High gloss finish/trans-purple top. 19mm string spacing. Carbon fibre neck reinforcement bars, matching wood casing/ramp; arched body top (bass side). Versatile and articulate, this bass sound tight, with big lows, slightly compressed mids and a sparkling top end.

 
Custom fitting:
Harvested from a 1000+ year old maple tree reclaimed from a river bed, the top veneer was chemically treated for stability with patented process by Abonos Italy, then laser engraved with original artwork by Italian artist Lia Bosch. Mother of pearl 'Lia' inlays.
bottom of page