MüB

Custom Like No Other.

P-ups, Electronics, Hardware.

MüB Anchors.

A MüB proprietary design, these string anchors firmly secure the strings while greatly reducing weight. Machined out of solid brass, available in black, shiny or satin chrome, gold and natural brass.

MüB Hardware.

Made by ETS Germany. Machined out of solid brass. Available in black, shiny or satin chrome and gold.

Traditional Tuning System.

Hipshot USA. Ultra light tuners and bridges in either brass or aluminum. Any model.

The MüB-Tone

A deceptively simple and intuitive preamp, Monster, er...master of flexibility.

Infinity p-ups.

A single or split coil p-up housed in a soapbar wooden casing. The side of the casing is the industry standard and any soapbar p-up will fit the cavity. So, if you want to replace your single coil with a dual coil of any brand you just have to have it wired. No modification needed. Neat, innit?

P-ups and electronics.

Bartolini, Nordstrand, Aguilar. Any model in any configuration. Custom wound, custom wiring and wood casings available.

The MÜB Über-Tone.

The intuitive simplicity of a passive system in a fully active unit. Just roll on or roll off the Über-Tone knob and the powerful, state-of-the-art circuit will deliver an amazing array of tones.

The basic configuration is Vol, Balance (or p-up switch/Über-Tone. The unit can be customized to a specific basic tone. Ranging from a Motown-like sound to snappy, modern one.

Adding a Master Tone with active/passive push/pull capability and using it in conjunction with the Über-Tone control allows for countless permutations, always sounding very musical.

Adding a 3 position Mid frequency gives the player instant access to individually customized +/-12db boost and cut options. For instance, 1. Flat 2. Slap tone with mid scoop 3. Aggressive mid boost.

Designed in collaboration with and made by [sfx] custom shop in London.

Infinity p-ups.

A single or split coil p-up housed in a soapbar wooden casing. The side of the casing is the industry standard and any soapbar p-up will fit the cavity. So, if you want to replace your single coil with a dual coil of any brand you just have to have it wired. No modification needed. Neat, innit?